Filling your hot tub correctly is essential to ensure it functions properly and maintains clean, healthy water. Below, we'll explain how to do this safely and efficiently so you can enjoy your relaxation experience to the fullest.
Step 1. Disconnect the power
Before you begin filling the hot tub , disconnect the power. This is essential to avoid any risk of electrical accidents while filling.
Step 2. Anchor the hose to the filter
To prevent air from entering the hydraulic circuit, it is recommended to anchor the hose to the filter . This will ensure that water flows properly into the hot tub and does not interfere with its operation.
Step 3. Filling duration
Filling time can vary depending on several factors, such as the liter capacity of the hot tub, water pressure, and hose diameter. Make sure to take these factors into account when estimating the required time.
Step 4. Determine the maximum water level
Once you begin filling your indoor or hot tub hot tub , it's important to know how high the water level should be. You can check the proper level as follows:
- The minimum level must be above the hot tub label.
- The maximum level should be one or two fingers above the label.
Step 5. Check pH and Chlorine/Bromine levels
When the hot tub is full, it's essential to check the pH and chlorine/bromine levels to ensure the water is in proper condition. Recommended values are:
- pH: between 7.2 and 7.6
- Chlorine: between 1 and 1.2 ppm
- Bromine: between 2.2 and 3.3 ppm
If the levels are not within these ranges, they must be adjusted with appropriate products . For example, pH lowering liquid, pH increasing liquid, regulators, etc.
Step 6. Reconnect power
Once the hot tub is filled and the pH and chlorine/bromine levels are correct, reconnect the power to the hot tub to ensure everything is working properly.
Additional tips:
- It's important to use clean water to fill your hot tub . If the water contains impurities or dirt, it can negatively affect the water quality in your hot tub and make it harder to keep it clean and healthy.
- Use specific products to adjust the pH and chlorine/bromine according to the needs of your hot tub.
- It's important to keep in mind that you shouldn't fill the hot tub with hot water . If the water temperature exceeds 35 degrees Celsius, it can trigger the safety thermostat and damage the equipment and connections.
With these simple steps, you'll be able to fill your hot tub correctly and enjoy a safe and enjoyable relaxation experience. Don't forget to share this article and read our blog for more tips on caring for your hot tub !